这是一个仿立体3D效果的 Lora，在人物周围模拟红色与青色的裸眼3D效果。
经网友提醒，Lora 是接近于色差效果，在人物周边模拟红色与青色的边缘颜色效果。
调整权重可增强和降低效果，对画风影响较小。
不需要触发词，权重推荐不超过 2。
对部分模型效果较差，会显示多余的线条、噪点、画风混乱等情况。
-
v2版本更新，相比v1有以下改进：
1. 青色红色的边缘宽度更细了，因为减轻了效果，v2需要更高的权重才能达到v1对应的效果；
2. 大量减少人脸与衣服褶皱区域的色差效果，基本上只在人物轮廓与衣服主要区域才会有色差效果；
3. 高权重下人脸与衣服褶皱不容易崩了，权重可调节也更宽泛了。
This is Lora with imitate anaglyph 3D effect, which simulates the naked-eye 3D effect of red and cyan around the characters.
Netizens reminded that Lora is close to the chromatic aberration effect, simulating the edge color effect of red and cyan around the character.
Adjusting the weight can enhance and reduce the effect, with less impact on the style of painting.
No trigger words are required, and the weight recommendation does not exceed 2.
The effect on some models is poor, and redundant lines, noise, and confusing painting styles will appear.
-
The v2 version is updated and has the following improvements compared to v1:
1. The edge width of cyan and red is thinner. Because the effect is reduced, v2 requires a higher weight to achieve the corresponding effect of v1;
2. Significantly reduce the color difference effect in the wrinkle areas of the human face and clothes. Basically, the color difference effect will only occur in the outline of the character and the main areas of the clothes;
3. Under high weight, the wrinkles on the face and clothes are less likely to collapse, and the weight is more widely adjustable
