HHM Interior Designer (SD1.5)
SD1.5
SD1.5
上傳圖像 (Load image)細節強度 (denoise strength 0.4~0.9)選擇基礎模型 (CKPT SD1.5 only)選擇Lora模型 (Lora SD1.5 only)選擇Lora強度 (lora strength)選擇Lora模型 (Lora SD1.5 only)選擇Lora強度 (lora strength)
SD1.5
建議先行A 放大係數設定1.0 再後進行B 並適度調整放大係數It is recommended to perform A first and set the upscale to 1.0, then proceed to B and adjust the upscale appropriately.
建議先行A 放大係數設定1.0 再後進行B 並適度調整放大係數It is recommended to perform A first and set the upscale to 1.0, then proceed to B and adjust the upscale appropriately.
建議先行A 放大係數設定1.0 再後進行B 並適度調整放大係數It is recommended to perform A first and set the upscale to 1.0, then proceed to B and adjust the upscale appropriately.
建議先行A 放大係數設定1.0 再後進行B 並適度調整放大係數It is recommended to perform A first and set the upscale to 1.0, then proceed to B and adjust the upscale appropriately.
注意:你必須在草稿圖中用筆刷圈選出修改區域Note: You must use a brush to circle the modified area in the draft
注意:你必須在草稿圖中用筆刷圈選出修改區域Note: You must use a brush to circle the modified area in the draft
HHM
HHM
HHM
HHM
HHM
HHM
HHM
HHM
HHM
HHM
HHM
HHM
HHM
HHM
HHM
HHM
HHM
HHM
HHM
HHM